 |
|
|
|
IGNITION COILS 3 OHM
Honda CB500/550
1. 3 ohm green coils. Replacement for factory coils.
Matched to the Dyna-S Electronic Ignitions. Fatter spark
means smoother running and less chance of fouling a
plug. See below for plug wires.
Check the resistance of the coils you are replacing to
ensure a correct match. These coils work to replace
some point system coils where the resistance is in the
low to mid 3 ohm range. For some Kawasaki bikes with a
resistor in the circuit (KZ1000 79 & 80), the 3 ohm coil is
the best choice - just remove the ballast resistor from the
circuit. If you have questions if these are correct, please
call us or Dynatek at 1-800-928-3962
Never select a coil with a lower resistance than your
ignition system - this will cause the coils to overheat and
burn out... It is OK to select coils with a slightly higher
resistance. For example 3.0 ohm coils with a 1.5 ohm
CDI ignition. While this isn't optimal, it works and allows
you to switch your CDI ignition over to a Dyna-S in the
future.
|
|
|
|
|
|
 |
|
|
Dyna-S Electronic Ignition
Honda CB500/550/750
1 year factory warranty - for Honda 1969-78 CB500,
CB550, CB750. No more messing with points and
creates a stronger more consistent spark.
|
|
|
|
